MX-M264U SPECIFICATIONS 2 – 5
*1: Supported Envelop types:
Monarch/Com-10/DL /C5/Custom
Custom envelope size is supported by Sim. Not displayed at the default setting.
*2: Custom size
Long size paper (bypass tray only): support up to 1,200mm by Sim
* Long size paper ejection is from center tray/inner finisher
*3: Comply to “Paper type setting”
*4: Can be input but array is not supported
*5: Can be input and stapled but array is not supported
*6: Array of heavy paper more than 130g/m
2
is not supported
*7: Heavy paper can be stapled only in case of using as front and back cover page with other normal paper
Paper Type Thin paper 13-16 lb bond (55 - 59g/m
2
)—YesYesYesYes
Plain paper 16-28 lb bond (60 - 105g/m
2
) Yes Yes Yes Yes Yes
Recycled paper Yes Yes Yes Yes Yes
Color paper Yes Yes Yes Yes Yes
Letter head Yes Yes Yes Yes Yes
Pre-printed Yes Yes Yes Yes Yes
Pre-punched Yes Yes Yes Yes Yes
Heavy paper 28 lb bond - 110 lb index
(106 - 200g/m
2
)
—YesYesYes—
110 lb index -140 lb index
(201 - 256g/m
2
)
—————
Envelope 75 - 90g/m
2
—YesYes— —
Transparency — Yes Yes — —
Label — Yes Yes — —
Tab paper — Yes Yes — —
User settings 1 - 7 Yes*
3
Yes Yes Yes Yes
AB System (mm) Inch System (inch)
Min. Max. Min. Max.
Bypass tray X 140 432 5-1/2 17
Y 100 297 5-1/2 11-5/8
Duplex X 182 432 8-1/2 17
Y 182 297 7-1/4 11-5/8
Duplex
Output Section
Center Tray
Right Exit
Tray
Exit Tray
Job
Separator
Offset