MX-M264U SPECIFICATIONS 2 – 8
F. D ial
* LDAP: Lightweight Directory Access protocol
G. Memory for Transmit/Receive
H. Function
Manual dialing To be entered by 10-key, # key, * key
Re-dialing The previous 8 items (max.) can be saved, and
one of them can be selected.
One-touch call is available.
One-touch dialing 1000 items including the group dialing items
Group dialing 1000 items including the one-touch dialing
items
Program dialing Max. 48 items
Chain dialing Max. 64 digits including one-touch dialing,
10-key dialing, and pause.
Dial search Alphabet order search, User index groups
Quick search Yes
LDAP search Yes
Sub address Yes
Password Yes
Memory box registration Yes
FAX transmission data HDD
FAX reception data SD card
Transmit
function
Calling function Yes
Requires the frequency
setting for each destination.
PBX function Germany, France only
Memory transmit Yes (Definable destinations :
94 destinations)
On-hook Yes
Quick online transmit Yes
Direct transmit Yes
Manual transmit Yes
Auto re-call mode Yes
Time indication function Yes
Sequential broadcasting
function
Yes
F code interface
broadcasting indication
function
Yes
Only one interface station
can be specified.
F code interface
broadcasting function
Yes
F code confidential send
function
Yes
Polling Yes
Even with another company
machine
Sequential polling function Yes
Even with another company
machine
F-code polling Yes
Bulletin board Yes
F code bulletin board
function
Yes
Auto reduction transmit Yes
A3 ï‚® B4, A3 ï‚® A4, B4 ï‚® A4
Rotation transmit Yes
Counterclockwise rotation of
90 degrees
Duplex transmit Yes
Document transmit from OC
function
Yes
Long length original transmit Only when RSPF is used.
Transmission is enable up to
1000mm.
Mixed documents function Only when RSPF is used.
Zoom transmit Yes
2 in 1 transmit Yes
Card shot transmit Only when transmitting from
OC
Transmit
function
Thin paper scan function Available except for duplex
scan
Edge erase transmit function Yes
Only for the fixed sizes
Job build Yes
999 sheets or memory full
Page division transmit Yes
Cover No
Index No
Transmit message adding
function
No
Receive
function
Auto receive Yes
Manual receive Yes
DRD call function Distinctive Ring Detection
North America: Standard,
Pattern 1 – 5
Australia/New Zealand/Hong
Kong: ON/OFF (TEL/FAX)
Memory receive Yes
Transfer function Yes
Number of registration:
1 item
Specified receive function Yes (Number of registration)
Rejection numbers: Max.50
items
Receive data print condition
function
Yes
Receive data staple setting/
Copy number setting
Yes
Rotation receive Yes
Output by clockwise rotation
of 90 degrees
Divided receive Yes
Divided print is not made in
duplex mode.
Duplex receive Yes
F-code confidential receive Yes
Special
function
Print hold Yes
Document Admin Yes
Inbound Routing Yes
Sender registration function Yes
Sender print function Yes
On-hook dialing function Yes
Retransmit function Yes
Pause function Yes
Pause time is 1 – 15 sec.
Sound volume setting
function
Yes
Tone pulse select function Tone, Pulse, Auto
(North America/Taiwan)
* For the other destinations,
set with the soft switch.
External phone connection Yes
Memory remaining capacity
check function
Yes
Only the integral part is
displayed.
Back up Yes
Registered data read/write
function
Yes
Report/List Yes
Destination check function Yes
Broadcasting destination
display function
Yes
Transmit job change function Yes
Save-energy function Yes
Line monitor display function Yes
FAST Yes
Facsimile Automated Service
Technology
Time adjust function Yes
Summer time ON/OFF
PC-FAX Yes
Color mode No
To Next Page
Loading...
Need help?
General
