Sharp MX-M620N

MX-M700N OPERATION PANEL B – 3
b. LVDS PWB
1) Remove the operation panel unit.
(See "(1) Operation panel unit")
2) Disconnect each cables.
3) Remove the LVDS PWB.
c. LCD INV-J PWB
1) Remove the operation panel unit.
(See "(1) Operation panel unit")
2) Disconnect each cables.
3) Remove the LCD INV-J PWB.
d. LCD unit
1) Remove the operation panel unit.
(See "(1) Operation panel unit")
2) Disconnect each cables.
3) Remove the LCD cover.
4) Remove the LCD unit.
e. Touch panel
1) Remove the operation panel unit.
(See "(1) Operation panel unit")
2) Disconnect the flat cable.
3) Remove the earth wire.
4) Remove the LCD unit.
5) Remove the touch panel.