MX-M700N DUPLEX SECTION H – 7
15) Remove the bearing, pulley, gear and pin from the transport
roller 21.
f. Duplex motor 1
1) Pull out the left door.
2) Remove the cover.
3) Remove the duplex motor 1.
g. Duplex motor 2
1) Pull out the left door.
2) Remove the cover.
3) Remove the duplex motor 2.
h. Paper exit gate solenoid
1) Pull out the left door.
2) Remove the cover.
3) Remove the paper exit gate solenoid.
i. Duplex paper entry detector
1) Pull out the left door.
2) Remove the paper guide unit.
To Next Page
Loading...
