Sharp MX-M620N

MX-M700N PHOTOCONDUCTOR SECTION J – 7
j. OPC drum cleaner temperature sensor
1) Remove the upper cover.
2) Remove the OPC drum cleaner temperature sensor.
k. Discharge lamp
1) Remove the upper cover.
(See “j. OPC drum cleaner temperature sensor”)
2) Remove the discharge lamp.
* Be careful not to break the pawl when fixing.
l. Image density sensor
1) Remove the upper cover.
(See “j. OPC drum cleaner temperature sensor”)
2) Remove the connecter.
3) Remove the OPC drum. (See “a. OPC drum”)
4) Remove the image density sensor.
m. OPC drum marking sensor
1) Remove the OPC drum. (See “a. OPC drum”)
2) Remove the OPC drum marking sensor.
* Execute cleaning.
A