Sharp MX-M620N

MX-M700N SIMULATION 7 – 5
24 1 JAM/Trouble counter data clear {
2 Paper feed counter clear {
3 ORG/Staple counter clear {{
4 Maintenance counter data clear {
5 Developer counter data clear {
6 Copy counter data clear {
7 Drum/Toner counter data clear {
9 Printer/Other counter data clear {
10 FAX counter data clear {
11 Various rotation time timer clear {
15 Network scanner counter data clear { (FAX)
25 1 Toner concentration sensor monitor {
2 Auto developer adjustment {
26 2 Size setting {
3 Auditor setting {
5 Counter mode setting {
6 Destination setting {
10 Network scanner trial mode setting {
18 Toner save mode setting {
30 CE mark conformity control inhibit/allow setting {
35 Trouble memory mode setting {
38 Print stop setting when life over {
41 Center binding mode AMS setting {
50 Black-White reverse function valid/invalid setting {
52 White paper exit count-up setting {{
68 CA key cancel function valid/invalid {
27 1 PC/MODEM communication trouble (U7-00) detection YES/NO setting {
5 Tag number setting {
30 1 Main unit sensor check {
2 Tray sensor check {
40 1 Manual paper feed size width detection check {
2 Manual paper feed size width detection level adjustment {
7 Manual paper feed size width detection adjustment value input {
11 MPT size width detection check {
12 MPT size width detection level adjustment {
41 1 Document size detection photo sensor check {
2 Document size detection photo sensor detection level {
3 Document size detection photo sensor light receiving/detection level check {
43 1 Fusing temperature control temperature setting (Normal/Energy-save mode) {
3 Fusing roller RPM setting. {
44 1 Process correction inhibit/allow setting {
2 DM/ID sensor gain adjustment {
4 Standard patch density setting {
5 Patch making reference condition setting {
9 Process control data display {
12 Process control patch data display {
14 Temperature/humidity sensor output monitor {
16 Toner concentration reference value check {
46 2 Copy exposure level adjustment (binary) {{
9 Copy exposure level adjustment/individual setting (Text binary) {{
10 Copy exposure level adjustment, individual setting (Text/Photo binary) {{
11 Copy exposure level adjustment, individual setting (Photo binary) {{
12 FAX exposure level adjustment (1 mode auto adjustment) {{
13 FAX exposure level adjustment, individual setting (Normal text) {{
14 FAX exposure level adjustment, individual setting (Fine) {{
15 FAX exposure level adjustment, individual setting (Super Fine) {{
16 FAX exposure level adjustment, individual setting (Ultra Fine) {{
17 Shading reference value change (Gain adjustment) {
18 gamma change (Copier mode) {
19 Exposure mode setting {
20 OC/SPF exposure correction {
21 Scanner exposure level adjustment (1 mode auto adjustment) {
22 Scanner exposure level adjustment, individual setting (Normal text) {
23 Scanner exposure level adjustment, individual setting (Fine) {
24 Scanner exposure level adjustment, individual setting (Super Fine) {
25 Scanner exposure level adjustment, individual setting (Ultra Fine) {
27 gamma change (Scanner mode) {
31 Copy sharpness setting {
39 FAX sharpness setting {
45 FAX exposure level adjustment, individual setting (600dpi) {{
Main
code
Sub
code
Operation content
Data save destination/Target
MFP Scanner Engine