1-65
BEFORE USING THE MACHINE
Using the inserter
For paper sizes that can be stapled or punched, see the finisher and saddle stitch finisher specifications on page 1-51.
Some paper types cannot be stapled or punched (see "NOTES" on page 1-54). Do not use these paper types.
1
Load paper in the inserter.
Load the paper face up. When performing pamphlet stapling,
place the paper so that the opened pages are face up as
shown.
Adjust the paper guide to the size of the paper.
2
Press the desired mode key.
Press key (2) on page 1-63 for stapling or pamphlet stapling. Press key (1) on page 1-63 for punching. The selected mode
lights up.
Pamphlet stapling can only be used when the saddle stitch finisher (MX-FN16) is installed.
When using pamphlet stapling, stapling and punching cannot be used in combination.
3
Press the [START] key.
Make sure that the [START] key light is illuminated green and
then press the [START] key.
To Next Page
Loading...
Need help?
General
