Copyright © All rights reserved, SHARP CORPORATION
Confidential
74
5.5.Installation tool 4
Product Name (temporary) Purpose and Precautions for Use Image
Temporary stand
（UKOG-1024MPZZ）
*Common tool for PN-V
Series
■This stand is for fixing the display temporarily to check
operation and perform settings before installation.
- Requires two pieces for one display.
- Requires two M4 screws for each stand.
- This tool helps increase installation efficiency. Use it as
necessary.
*The conventional pipe-type stand will be change to this type.
(Both compatible)
Note: Contact the dealer from which you purchased the main unit or our sales reps if you need above tools.
We provide the following service parts for installation (for a fee).
To Next Page
Loading...
