Sharp R-8320E User Manual

OVEN LAMP REMOVAL
1. Disconnect the oven from the power supply and remove
2. Discharge the high voltage capacitor.
the outer case.
3. Remove the oven lamp.
UPPER LATCH SWITCH AND MONITOR SWITCH (AUSTRALIA MODEL) REMOVAL
1. Disconnect the oven from the power supply and remove
5. Remove the single (1) screw and washer holding the
the outer case.
upper latch hook to the oven cavity front flange.
2. Discharge the high voltage capacitor.
6. Remove the upper latch hook from the flange by mov-
3. Remove the complete control panel assembly, referring
ing it downward.
to the control panel assembly and component removal.
7. To remove the individual switch from the upper latch
4. Disconnect the wire leads from the switches.
hook, push outward the two (2) retaining tabs holding
the switch in place.
the switch in place.
LOWER LATCH SWITCH REMOVAL
1. Disconnect the oven from the power supply and remove 5. Remove the lower latch hook from the flange by mov-
the outer case.
ing it downward.
2. Discharge the high voltage capacitor. 6. Disconnect the wire leads from the switch.
3. Remove the complete control panel assembly, referring
to the control panel assembly and component removal.
7. Push outward the two (2) retaining tabs holding the
switch in place.
4. Remove the single (1) screw and washer holding the
lower latch hook to the oven cavity front flange.
8. The switch is now free.
106

Sharp R-8320E Specifications

General

Brand	Sharp
Model	R-8320E
Category	Microwave Oven
Language	English