To Cook at Multiple Sequence
Suppose you want to program the oven to cook at HIGH and reduce to MED HIGH.
Check the microwave recipe section of This Carousel Convection Microwave Cookbook for ideas on
when to use multiple sequence cooking. You can set 4 sequences.
*
Suppose
you
want to roast beef for 5 minutes at HIGH, and then continue to cook for 30 minutes
at MED HIGH.
Procedure
Pad Order
Display
.
1.
Enter desired time for first cook-
ing sequence.
2.
Select first Variable Cooking Con-
trol setting.
3. Enter desired time for second
cooking sequence.
4. Select second Variable Cooking
Control setting.
5.
Touch the COOK pad.
The timer begins to count
down. When it reaches zero.
--
When the timer reaches zero, all indicator lights will go out and an audible signal will sound. The time
of day will reappear on the display.
NOTE: If HIGH isselected
asthe
final sequence, it is not necessary to touch HIGH pad. If HIGH
is programmed as the first, second or third sequence, HIGH pad must be touched.
12
To Next Page
Loading...
Need help?
General
