NOTE: The Auto Start feature can be used for any of the programs described on the previous pages,
including:
1) cooking by time using the Variable Cooking Control
2) multiple sequence cooking
3) defrosting
4) convection cooking
5) memory cooking
To Check Auto Start Time
Once you have correctly programmed the oven for Auto Start, the correct time of day (not the
Auto Start time) will appear on the display. To check the time of day you have programmed the oven
to
begin cooking, follow these steps:
*
Suppose you have already set the Auto Start time at
4:30
p.m.
Step
Procedure
Pad Order Display
1.
Touch AUTO START pad.
[&iq
]I
The colon will flash on and off.
Checking the Auto Start time will not interfere with the operation of the oven. The oven will still
start at the designated time of day and perform the cooking sequences you have programmed.
To cancel Auto Start, simply touch STOP pad and then CLEAR pad.
(
Minute Timer
1
The Auto-Touch control panel can be used as a timer for timing up to 99 minutes, 99 seconds. There
is no cooking involved.
*
Suppose you want to time a 3 minutes long distance phone call.
Step
Procedure
Pad Order Display
1.
Enter desired time.
2. Touch TIMER pad.
The timer will begin counting down to zero. When the timer reaches zero, the signal will sound. The
time of day will reappear on the display.
To cancel the minute timer during operation, simply touch CLEAR pad and the time of day will
reap pear.
28
To Next Page
Loading...
Need help?
General
