1
To Cook by Memory
1
To use the information stored in the memory bank.
*
Suppose you have already stored the cooking program 2 minutes 20 seconds at MED HIGH in the
memory bank.
Step
1.
Touch MEMORY RECALL pad.
Procedure
t
Touch COOK pad.
Pad Order
I
1
MEMORY
RECALL
Display
I
M. HIGH
The information stored in the
memory bank will be repeated
until COOK or CLEAR pad is
touched.
Cook indicator will light and the timer will count down to zero.
When the timer reaches zero, all
indicators will go out and an audible signal will sound.
The time of day will reappear on display.
NOTE: The oven can be started immediately after touching MEMORY RECALL pad. It is not
necessary to wait for the memorized cooking program to be reviewed before touching COOK
pad.
The Memory can be used for any of the programs described on the previous pages, including:
1) cooking by time using the Variable Cooking Control
2) one to four step cooking (up to four sequences)
3) defrosting
4) convection cooking
At times you may forget exactly what information is stored in the memory bank or simply want to
check if the oven has been programmed correctly.
*
Suppose the memory bank has been programmed for 5 minutes at MED LOW/DEFROST, and
followed by 2 minutes at HIGH.
step
Procedure
Pad Order
-
Display
1.
Touch MEMORY RECALL pad.
piq
11
Then
-1
The cooking sequence will be
repeated
until COOK or
CLEAR pad is touched.
2. Touch CLEAR pad.
Time of day will reappear on
71
display.
30
To Next Page
Loading...
Need help?
General
