10
MAKING COPIES
NORMAL COPYING
●
For manual copy density adjustment, press the EXPOSURE
key to select MANUAL and adjust with the LIGHT and DARK
keys as desired.
●
For photographs, select PHOTO and then adjust with the LIGHT
and DARK keys as desired.
6
Use the 10-key pad to enter the desired number of
copies.
●
The number will be shown in the copy quantity display.
●
A single copy can be made with the initial setting, i.e., when “0”
is displayed.
●
Use the clear (
C
) key to cancel an entry if a mistake is made.
7
Press the START key.
●
The number in the copy quantity display will decrease by 1 each
time a copy is made.
●
To cancel a copy run, press the CLEAR ALL ( ) key. Copying
will stop and the number in the copy quantity display will be reset
to 0.
●
To repeat the same copy sequence for a different original,
simply replace the original and press the START key.
Normal copying
To Next Page
Loading...
