Sharp SF-2530 - Misfeed Removal

79
OPTIONAL EQUIPMENT
Misfeed removal
The copier will stop when a misfeed occurs. The misfeed ( )
indicator will blink and blinking red misfeed location indicators will
indicate the approximate misfeed location.
SF-S54N 10-bin staple sorter
1
Pull the sorter lock lever and carefully slide the staple
sorter away from the copier.
2
Remove the misfed paper from the staple sorter or
from the exit area of the copier.
3
Slide the staple sorter back toward the copier and
latch it into place.
4
Open and close the front cover to cancel
the
indicator.
●
If the indicator is still blinking, check the inside of the
copier and remove any remaining misfed paper.
10-BIN STAPLE SORTER (SF-S54N)
10-bin staple sorter (SF-S54N)