Sharp SF-2530 - Reduction;Enlargement;Zoom

14
MAKING COPIES
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either auto-
matically with the AUTO IMAGE key or manually with the reduction
(
) key, enlargement ( ) key, or ZOOM keys. The zoom
function enables precise copy ratio selection from 50% to 200% in
1% increments.
Automatic
1
Place the original on the document glass and close the
document cover.
●
The ORIGINAL SIZE indicator for the detected size will light up.
2
Press the TRAY SELECT key to select the paper tray
with the desired paper size.
3
Press the AUTO IMAGE key.
●
The copy ratio will be automatically set.
●
If the size and orientation of the original do not correspond to
standard reduction/enlargement ratios for the selected paper
tray, then the ORIGINAL SIZE indicator will blink.
4
Enter the number of copies.
5
Press the START key.
NOTE:
To cancel the automatic reduction/enlargement mode, press the
AUTO IMAGE key again.
Reduction/Enlargement/Zoom
1
4
7
0
E
ORIGINAL
SIZE
PAPER
SIZE
17
14
11
11
11
×
×
×
×
×
EXTRA
AUTO PAPER
SELECT
TRAY SELECT
8
1
/ 2
8
1
/ 2
8
1
/ 2
8
1
/ 2
5
1
/ 2
POWER SAVE
START
1
2
3
4
5
6
7
0
C
8
9
AUTO IMAGE