87
OPTIONAL EQUIPMENT
AUDITOR CODE NUMBER:
FACTORY SETTING
The following is the factory setting of the Auditor Code
Number, which must be used to access the Auditing
Programs.
Factory setting = 000
This number must be entered when accessing the Auditing
Programs for the first time. (See page 37.)
NOTE:
The Auditor Code Number is an important security number
allowing the auditing manager to configure the auditor’s
settings.
The manager should register this code number — different
from the factory setting above — immediately after your
copier is installed.
★ NOTE:
Detach this page and store it in a safe place.
✂
To Next Page
Loading...
