46
GENERAL INFORMATION
COPIER TROUBLE?
Copier trouble?
Problem Solution
●
Copier plugged in? Plug the copier into a grounded outlet.
Copier does not operate.
●
Power switch on? Turn the power switch on.
●
Copy density properly See pages 9 and 20.
adjusted?
Copies are too dark or
too light.
●
Are the indicator and the Contact your Sharp Service Center as
copy quantity display blinking? soon as possible. See page 28.
Blank copies.
●
Is the original placed face down Place the original face down on the
on the document glass? document glass.
●
Paper too heavy?
Use copy paper within the specified
range. See page 49.
Copies smear if rubbed.
●
Paper damp?
Replace with dry copy paper. Be sure
to store copy paper in a dry location.
Use standard paper.
●
Non-standard paper used? If using special papers, feed the paper
through the manual feed tray.
Paper misfeeds
●
Is paper properly installed? See pages 4 and 12.
frequently.
●
Pieces of paper inside copier?
Remove all pieces of misfed paper.
See page 22.
●
Paper curled or damp?
Store copy paper flat in the wrapper
in a dry location. See page 50.
To Next Page
Loading...
