219
Installing and Removing the Paper Roll
Recording paper specifications
Be sure to use paper rolls specified by SHARP.
The use of any other paper rolls than specified could cause paper jamming, resulting in a POS terminal
malfunction.
Paper specification
Paper width: 1.75 ± 0.02 in. (44.5 ± 0.5 mm)
Max. outside diameter: 3.27 in. (83 mm)
Weight: 52.3 – 64.0 g/m
2
(45 – 55 kg/1000 sheets/788 x 1091 mm
2
)
Quality: bond paper
Paper tube: 0.71 in. (18 mm)
• Be sure to set paper roll(s) prior to using your machine, otherwise it could malfunction.
(How to set the paper roll) (How to cut the paper end)
Receipt side Journal side
Paper replease lever
To the printer
Incorrect
To the printer
Correct
Correct Incorrect
To release the paper, press the paper release lever down.
It is also used for removing a paper jam. The method for
removing a paper jam is described in “Removing a paper
jam” later in this section.
To Next Page
Loading...
