Sharp UP-600

26
Successive multiplication entries
This function is practical for such entries as a sale of an item sold by area (square foot).
• With the learning UPC function, after scanning a UPC code or pressing the
PLU/UPC
key, you may be required
to enter a unit price with the display “UNDEFINED CODE”. Enter the unit price and department code that
the UPC is to be associated to.
• Length or width: up to seven digits (4-digit integer + 3-digit decimal)
• Unit price: less than the programmed upper limit
• Length x Width x Unit price: up to seven digits
NOTE
For actual use of this function, please consult your dealer.
Length Unit price
PLU code
PLU code
When you use a programmed
unit price
Dept. entry (direct)
PLU entry (indirect)
Dept. entry (indirect)
PLU/subdept. entry (direct)
Subdept. entry
Width Department key
Unit price
Dept. code
Unit price Direct PLU
Unit price
Scan UPC code
UPC code
UPC entry
AMT
DEPT
#
@
FOR
ENTER
or
Item selection
ENTER
PLU
MENU1
PLU
MENU50
thru
Unit price
ENTER
PLU/subdept. entry (menu)
@
FOR
AMT
ENTER
or
PLU/UPC
PLU/UPC
PLU/UPC