Sharp Viewcam VL-H410X

4
6
7
8-
9
IO
11
'11)
\'/
- -
1
/Y
MENU 1
DATE/T 1 ME
: ;:gcy
bAREA
l SUMR TIME
* SETT I NG
OFF
DATEtTI ME
OFF
StD(EY:-
1.1994
12:00 AM
2.$;1994
12:Od AM
2. 6;:1'9&-
12:00 A'M' '
2.
6.1995
-;1:2:+0 0+/q-
2.,,6.1995
1 0 +,O,OI-AM
2. 6.1995
10: 30 AM
SETTING THE DATE AND TIME
Example:
Setting the date to 2 June 1995 (2. 6. 1995) and the
time to IO:30 am (IO:30 AM) in Sydney.
Notes:
I
l Check that the memory backup lithium battery has been
tnstalled before setting the date and time.
l The date and time, once set, are stored in memory.
1
2
3
4
5
Set the Operate switch to CAMERA.
Press the MENU button to display MENU 1.
If MENU 2 is displayed, press the PAGE button
(0) to get MENU 1 on the monitor.
Press the V or A button to select AREA.
Press the SET button until “11:SYDNEY”
appears.
l See the Time Zone Chart on page 19 for time
zone numbers and representative city for each
zone.
Press the v or A button to move the F pointer
to “SETTING”, and then press the SET button.
(At this time, “1 .l .1994, 12:OO AM” is displayed
with the “1” flashing.)
l When the memory backup is not operating,
e.g. when the VIEWCAM is first received from
the factory, the pointer automatically points at
this item.
Press the v or A button to select “2. ” (day),
and press the SET button.
Press the v or A button to select “6.” (month),
and press the SET button.
Press the v or A button to select “1995”
(year), and press the SET button.
Press the v or A button to select “10 AM”
(hour), and press the SET button.
10 Press the v or A button to select “30”
(minutes), and press the SET button.
l The internal clock starts operating when the
SET button is pressed.
11 The date and time settings are now complete
Press the MENU button, and the menu will
disappear from the monitor.
Note:
The menu display is automatically cancelled if no settings
are made within 5 minutes after the MENU button is
pressed.
16