Sharp Viewcam VL-H410X

MACRO SHOTS
FADE OUT
13
SLOW/FA&R
REC &ART,
button
STOP button
FADE IN
This VIEWCAM lets you shoot closeup images of
small objects such as flowers and insects, or make
title frames for your videos.
When you want to record a ma&rified image of a
subject which is within approximately 1.5 m of the
VIEWCAM, do not zoom in on the subject.
Instead, zoom out all the way by holding down the
Power Zoom “W” button, and then move the
VIEWCAM closer to the subject until you obtain the
desired image on the monitor.
The VIEWCAM will automatically focus on the
subject when the lens is set for the widest angle.
Notes:
. When you are recording a macro shot, see that the
subject receives sufficient illumination
l It is recommended that you use a tripod for recording
macro shots, to prevent camera shakes.
FADE IN & FADE OUT
Press the SLOW/FADER button to smoothly fade in
or fade out a scene.
FADE IN
1 Press the SLOW/FADER button in the Recording
Standby mode.
l “FADER” is displayed on the monitor.
2 Press the REC START/STOP button.
l “FADE IN” is displayed, the monitor becomes
white, and recording begins with a fade in of
the audio and the visual image
FADE OUT
1 Press the SLOW/FADER button during recording
l “FADER” is displayed on the monitor.
2 Press the REC START/STOP button.
l “FADE OUT” is displayed and recording
finishes with a fade out of both the audio and
the visual image.
43