RETURN/SEARCH button
1
I
PROG. SEARCH PROG. SEARCH
\
1
/,
-=
REW,
PROGRAM SEARCH
Program Search mode automatically returns the tape
to the beginning of a number of previously recorded
scenes A total of 10 different scenes can be found
on one tape
i
1
Set the Operate switch to VCR
2
Press the RETURN/SEARCH button.
l The
“REW”
or “FF” indicator starts flashing on
the monitor.
To cancel, press the RETURN/SEARCH button
again.
3
Press the REW or FF button
l
The tape rewinds or fast forwards to the
beginning of a recording.
Playback starts automatically when the
beginning of the recording is found. The
indicators on the monitor automatically go off
after about 10 seconds.
4
To rewind the tape to the beginning of the
previous recording, press the REW button again
while the indicators are on.
Example: To rewind the tape to the beginning of five different recordings
Monitor display
Tape position
(First recording) (Last recording)
Notes:
l Program Search
functrons
when the video cassette IS
stopped or
durtng
playback.
l Returns the tape to the Immediately
prevrous
recording
Skrpprng
the immediately previous recording is not
possible
l In steps 2 and 4, if the tape IS at a point ahead of the
most recent
recordrng,
the
“REW”
indicator will flash and
the “FF” indicator will not appear.
l In steps 2 and 4,
If
the tape is at a point before the most
recent recording, the “FF” indicator will flash and the
“REW”
Indicator will not appear.
l Does not function with recordings that are shorter than 10
seconds.
. If the video cassette was removed after the recordings
were made, Program Search does not function
32
To Next Page
Loading...
