Shelly Wave 1 Mini - Parameter No. 23 - O (O1) Contact Type - NO;NC; Parameter No. 25 - Set Timer Units to S or Ms for O (O1)

17
Values size: 2 Byte
Default value: 0
Values & their descriptions:
• 0 - Auto ON Disabled
• 1 - 32535 = 1 - 32535 seconds or milliseconds – see Parameter no. 25. Set timer units to
s or ms for O (O1) resolution 100ms
Parameter No. 23 - O (O1) contact type - NO/NC
The set value determines the relay contact type for output O (O1). The relay contact type can
be normally open (NO) or normally closed (NC).
Values size: 1 Byte
Default value: 0
Values & descriptions:
• 0 - NO
• 1 - NC
Relay logic:
Par-NO/NC
Command (switch, Z-Wave…)
Device output state
NO (0)
OFF
OFF (0 V)
NO (0)
ON
ON (230 V)
NC (1)
OFF
ON (230 V)
NC (1)
ON
OFF (0 V)
Parameter No. 25 - Set timer units to s or ms for O (O1)
Set the timer units to seconds or milliseconds. Choose if you want to set the timer in seconds or
milliseconds in Parameters No. 19, 20.
Values size: 1 Byte
Default value: 0