Shelly Wave 1 Mini - 16 Important Disclaimer; 17 Declaration of Conformity

27
Weight
19 ±1 g / 0.65 ±0.04 oz
Mounting
Wall box
Screw terminals max. torque
0.4 Nm / 3.54 lbin
Conductor cross section
0.5 to 1.5 mm² / 20 to 16 AWG
Conductor stripped length
5 to 6 mm / 0.20 to 0.24 in
Shell material
Plastic
Color
Blue
Ambient temperature
-20°C to 40°C / -5°F to 105°F
Humidity
30% to 70% RH
Max. altitude
2000 m / 6562 ft.
16. Important disclaimer
Z-Wave® wireless communication may not always be 100% reliable. This Device should not be
used in situations in which life and/or valuables are solely dependent on its functioning. If the
Device is not recognized by your gateway or appears incorrectly, you may need to change the
Device type manually and ensure that your gateway supports Z-Wave Plus® multi-channel
devices.
17. Declaration of Conformity
Hereby, Shelly Europe Ltd. (former Allterco Robotics EOOD) declares that the radio equipment
type Wave 1 Mini is in compliance with Directive 2014/53/ EU, 2014/35/EU, 2014/30/EU,
2011/65/EU. The full text of the EU declaration of conformity is available at the following
internet address: https://shelly.link/Wave1Mini-DoC