Shelly Wave 1 Mini - 14 Supported Load Types; 15 Technical Specifications

26
• SWITCH_MULTILEVEL_START_LEVEL_CHANGE : initiate a transition to a new level
(increase or decrease light intensity in case of dimmer, or move shutter up or down, …)
• SWITCH_MULTILEVEL_STOP_LEVEL_CHANGE : stop an ongoing transition (stop increase
or decrease light intensity in case of dimmer, or stop moving shutter up or down, …)
14. Supported load types
• Resistive (incandescent bulbs, heating devices)
• Inductive with RC Snubber (LED light drivers, transformers, fans, refrigerators, air-
conditioners)
• Capacitive (capacitor banks, electronic equipment, motor start capacitors)
15. Technical Specifications
Power supply
110 - 240 V AC, 50/60 Hz
Power consumption
< 0,3 W
Max. switching voltage AC
240 V
Max. switching current AC
8 A
Max switching power AC
2000 W
Max. switching voltage DC
30 V
Max. switching current DC
5 A
Overheating protection
Yes
Distance
Up to 40 m indoors (131 ft.)
(depends on local condition)
Z-Wave® repeater:
Yes
CPU
Z-Wave® S800
Z-Wave® frequency bands:
868,4 MHz
Maximum radio frequency power transmitted in
frequency band(s)
< 25 mW
Size (H x W x D)
29x35x16 ±0.5 mm / 1.11x1.35x0.63
±0.02 in