Shott BP-85HS-A - Low Pressure Sensor

E N G L I S H
Nome file:
7500016 - ISTR.INSTALL. HEAT PUMP VERS. EN.doc Rev. 4 del/of 05/11/2009
Page 26-di/of 40
6.2.3. Low pressure sensor.
The low pressure sensor stops the compressor when suction pressure in the high
pressure section is under the calibration value.
Trigger pressure is 0.05 [bar]. After a low pressure alarm, the heat pump must be
manually restarted, see Paragraph 5.2.4.
Figure 42: High pressure sensor.
Figure 43: Low pressure sensor.