Page 5-di/of 40
SERIES BP heat pumps must not be used with other heating systems such as electric
heaters.
This manual provides instructions for the installation and use of SERIES BP heat pumps.
Carefully read this manual before installation. Failure to observe the manual instructions
may cause personal or property damages or damage the heat pump.
Failure to observe the instructions in this manual immediately null and voids the warranty.
SHOTT International SRL is not liable for any damages due to improper heat pump use.
The manual must be kept integral and in good conditions. It must accompany the heat
pump until it is decommissioned.
In the event of malfunctions, consult the instruction manual and, if necessary, contact
specialised technicians.
Installation and maintenance must be performed by qualified technicians unless otherwise
indicated in the manual.
Initial system commissioning must only be performed by specialised technicians.
Working on the heat pump when connected to the electrical mains is strictly prohibited.
Only begin work after taking the safety measures.
The heat pump is not suited for people (even children) who suffer from physical, sensorial
or mental handicaps or people who do not have sufficient experience or training unless
instructed on heat pump use and assisted by a person in charge of their safety. Supervise
children to ensure they do not play with the device.
SHOTT International SRL continually strives to improve all types and models. We trust the
user will understand the technical modifications SHOTT International SRL reserves the
right to make on the shape and fittings on SERIES BP heat pumps.
1.7. Definitions
6
.
Power cord: flexible cord, for power supply, attached to the device.
Tool: Screwdriver, coin or any other object that can be used to move a screw or similar
fastening device.
Protection device: Device whose operations prevent hazardous situations in abnormal
operating conditions.
Contact switch disconnection: Disconnection of both power conductors with a single
contact opening action.
Heat pump: device that absorbs heat at a given temperature and releases it at a higher
temperature.
Heat exchanger: device specifically designed to transfer heat between two physically
separate fluids.
Compressor: device specifically designed to increase fluid pressure.
Evaporator: heat exchanger where coolant is vaporised by heat absorption.
Pressure limiter device: mechanism that automatically responds to a set pressure,
interrupting the operations of the element that controls pressure.
Device accessible to the public: device intended to be installed in homes or commercial
buildings.
Installation manual: document intended for specialised technicians that illustrates how to
commission and maintain the heat pump.
User manual: document intended for the end user that illustrates how to use the heat
pump.
Necessary clearance: minimum heat pump installation area.
2. Product presentation.
2.1. Product scope.
SERIES BP heat pumps were designed to heat and cool water intended for home pools.
6
Definitions in accordance with regulation CEI EN 60335.
To Next Page
Loading...
