Getting acquainted
Basic Control Parts
6
Master Fader
This fader is used to control overall dimmer output level of 16 channel faders when
master dimmer function is enabled.
Select Button
Press to shift between Pan and Tilt as well between Pan fine and Tilt fine.
Black Out Button
This button is used to shut off all fixtures being controlled.
Fine Button
Press to shift between 8-bit and 16-bit movement of joystick.
Up/ Down Buttons
These two buttons are used to adjust the dimmer digital value one by one.
Sequencer Button
This button is used to turn on/off the sequencer.
Pause Button
This button is used to suspend the sequencer or shows.
Stand Up/ Down Buttons
These two buttons are used to adjust the proportional factor of stand time when
execution of shows or sequencer. They can also be used to adjust step time in
Edit menu. Show
Cross Up/ Down Buttons
These two buttons are used to adjust the proportional factor of cross time when
execution of shows or sequencer. They can also be used to adjust fade time of
step in Edit menu. Show
To Next Page
Loading...
