SHOWTEC Stage Master Pro - Add a Show After

Add a Show After
Esc
F1
F2
F3
F4
F5
F6
F7
F8
F9 F10 F11 F12
Show Insert
In To
In Show Edit Utility Menu, press F7(InsShow) to access Show Insert menu. This
menu allows you to add a show in to another show.
First press F3(Show) to position the cursor ">>" in Show line, use F6(Up), F7(Down)
or F12(Keypad) to select the show(from 1 to 36).
Next
step after which you intend to add a show.
Press F10(Insert), you
press F4(In To) to position the cursor ">>" in In To line, use F6(Up), F7(Down)
or F12(Keypad) to select the
will be required to confirm by "Ok" or to exit by the F1
button. "Ok" confirms this operation, as a result, this show will be added after
the step.
Press the F1(Esc) button to go back to the previous menu.
Show
Insert
Keypad
Up
Down
>> 1
9
48
Edit Show Menu