Step Multi Copy
Step Multi Copy
Esc
F1
F2
F3
F4
F5
F6
F7
F8
F9 F10 F11 F12
End
Start
Copy
Keypad
Up
Down
5
9
In To
>> 1
51
Edit Show Menu
In Show Edit Utility Menu, press F11(Copy) to access Step Multi Copy menu. This
menu allows you to copy multi steps and add them after a step.
First press F2(Start) to move the forward cursor ">>" in line with , use F6(Up),
F7(Down) or F12(Keypad) to select the starting step. Next select the end step.
Then select the step after which you intend add these steps. Press F10(Copy),
you
Start
will be required to confirm by "Ok" or to exit by the F1 button.
"Ok" confirms this operation. In this case, these 5 steps from step 1 to step 5 will
be added after the step 9 of this show.
Press the F1(Esc) button to go back to the previous menu.
To Next Page
Loading...
