Shure Incorporated
20/45
◦
◦
◦
◦
Device configuration menu map
Device Audio
3.5mm Cfg
3.5mm Level: Adjust the headphone level from -60 to 12 in 1 dB steps.
3.5mm Limiter: Adjust the limiter threshold to prevent overdriving the headphone amp. 0 to -30 dB.
3.5mm Output: Choose an output mode. See 3.5 mm. Output Settings for more details.
3.5mm FD-S Options: When FD-S mode is engaged, select whether the headphone monitoring point is before or after FD-
S selection.
Audio Format
Choose analog or AES3 audio format.
AES3 Rate
Configure sample rate of AES3 output.
Device RF
RF Band
Select the tuning band for the receiver. For proper operation, this should match the band of your transmitters.
Encryption
To Next Page
Loading...
