EasyManua.ls Logo

Shure Microflex Wireless - Digital Signal Processing

Shure Microflex Wireless
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
102
Microflex Wireless Specifications
Digital Signal Processing
AD/DA Converter
24-bit, 48 kHz
Latency
Estimated Nominal, ±0.1 ms
Analog-to-
Dante
0.21 ms
Dante-to-
Analog
0.24 ms + TN
TN = Network latency in milliseconds, as set in Dante
Controller.
Note: Dante network latency is typically associated with the
receiving device.
Networking
Network Interface
Four-Port Gigabit Ethernet Switch, Dante digital audio
Uplink Port (Port 4)
Selectable, blocks multicast traffic
Power over Ethernet (PoE)
Provided on Port 1 to power MXWAPT
Cable Requirements
Cat 5e or higher, shielded, 100 m maximum between
network devices
Network Addressing Capability
DHCP, link-local, static

Table of Contents

Related product manuals