EasyManua.ls Logo

Shure Microflex Wireless - System

Shure Microflex Wireless
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
97
Microflex Wireless Specifications
System
RF Carrier Frequency Range
Band Region Frequency Range
Z10 USA, Canada, Mexico 1920–1930 MHz
Z11
Europe, Asia,
Middle-East
1880–1900 MHz
Z12 Japan 1893–1905 MHz
Z15 Taiwan 1880–1895 MHz
Z14 Brazil 1910–1920 MHz
Working Range
50 m (160 ft)
Note: Actual range depends on RF power setting, signal
absorption, reflection, and interference.
Audio Frequency Response
50 Hz – 20 kHz (+1, -3 dB)
Note: Dependent on microphone type
Dynamic Range
>99 dB, A-weighted
System Gain
Mic gain @ 0dB to line level output on MXWANI through
Dante
+50 dB
Latency
18 ms, nominal
System Audio Polarity
Positive pressure on microphone diaphragm (or positive
voltage on pin 3 of TA4M connector) produces a positive
voltage on pin 2 of the ANI (with respect to pin 3 of the
low-impedance output).
Radio Transmission
Time Division Multiple Access (TDMA), Gaussian
Frequency Shift Keying (GFSK), 365 kHz max. deviation
RF Sensitivity
−87 dBm, minimum
Power
19 dBm (80 mW) maximum, See Frequency Range and
Output Power table
Cable Requirements
Cat 5e or higher, shielded, 100 m maximum between
network devices
Network Addressing Capability
DHCP, link-local, static
Operating Temperature Range
0°C (32°F) to 49°C (120°F)
Storage Temperature Range
-29°C (-20°F) to 74°C (165°F)

Table of Contents

Related product manuals