86
Software
Dante
®
Software by Audinate
Audinate software provides additional function and control
of the Dante
®
digital audio network. Visit Audinate's website
for instructions for download and installation.
Dante Controller
Dante Controller (DC) is free software by Audinate that is
used to configure and manage a network of Dante devices.
Use it to route channels between Dante-enabled devices
and to monitor the status of the device, clock, and network.
Important: The MXWAPT must be the Dante clock
master for the network. Do not change the clock
master from the MXWAPT (default selection) to
another device.
Note: DC software is not required for routing audio
within the MXW system. Use caution when using DC,
as changing settings may interfere with MXW system
functionality.
Dante Virtual Soundcard
Dante Virtual Soundcard (DVS) acts as an audio driver
used to monitor and record digital audio without additional
equipment. DVS uses a computer's standard Ethernet ports
to transmit and receive up to 64 channels from any Dante
enabled device on the same network.
To Next Page
Loading...
