3
Table of Contents
Table of Contents 3
Overview 4
General Description 5
Features 6
MXW Wireless System 7
System Design and Technology 10
Hardware Description 12
Access Point Transceiver (APT) 13
Audio Network Interface (ANI) 15
Networked Charger (NCS) 18
Microphone Transmitters 20
Rechargeable Batteries 26
Installation 30
Additional Equipment 31
Rack Installation 32
Securing the Charging Station 33
Two-Channel Charger Wall Mount 35
Mount the Access Point Transceiver 39
Power the Hardware 41
Connect the Components 43
Accessing the MXW Control Software 45
System Setup 46
Group Devices to Form Audio Channels 47
Channel Routing between Devices 51
Link Microphones to Group Channels 54
Preparing a Backup Microphone 55
Configurations: Managing Multiple Groups 57
Exchanging or Removing a Component 59
Link a Microphone Over the Network 60
Wireless Management 61
Overview of Channel Coordination 62
Scanning Available RF Spectrum 63
Setting RF Power 65
Using Multiple 2- or 4-Channel Access Points 66
Networking 68
Networking Best Practices 69
Configuring IP Settings 69
Advanced Setup 71
Software 73
Shure Web Device Discovery Application 74
MXW System Control Software 75
Control Software for the MXW Audio Network Interface 83
Dante
®
Software by Audinate 86
Firmware Updates 87
Troubleshooting 88
Troubleshooting 89
Additional Resources 90
Factory Reset 91
Connecting to an External Control System 92
IP Ports and Protocols 93
Accessories and Model Variations 94
Microflex Wireless Specifications 96
System 97
Transmitters 98
Access Point Transceiver (APT) 99
Networked Charging Station (NCS) 100
Audio Network Interface (ANI) 101
Transmitter Output Power 103
Wiring Diagram 104
Safety Information 105
Certifications 107
Table of Contents
To Next Page
Loading...
