58
System Setup
Device Availability
When setting up a group or managing devices, it is
important to understand the difference between open and
associated devices.
Open Device
A device that is not associated to a group is considered
'open.' Open devices are available for association by
selecting the drop-down window in a Group row. The device
will show Open in the Group column of the Utility page.
Associated Device
A device is considered 'associated' once it has been
selected in a group row. Each device can only belong to
one group at a time (and therefore one Configuration). Once
a device has been associated to a group, it is managed on
the Configuration tab can be viewed in detail on the Utility
tab. The device will show its group number in the Group
column of the Utility page.
A device can be unassociated by selecting 'none' in the
group row drop-down to clear it from the group. The device
is then open and available for association to another group.
Tip: Performing a factory reset will default the device
to open.
Associated devices show group number
Available devices show Open
Device Availability
To Next Page
Loading...
