14
Hardware Description
⑤ Ethernet Port
Connect a shielded Cat5e (or higher) cable to a PoE source
and the network.
⑥ Ethernet Status LED (Green)
• Off = no network link
• On = network link established
• Flashing = network link active
⑦ Ethernet Link Speed LED (Amber)
• Off = 10/100 Mbps
• On = 1 Gbps (required for proper MXW functionality)
⑧ Cable Routing Path
Provides a path for the Ethernet cable to enable a flush-
mount to the ceiling or wall.
Directional Antennas
The access point contains multiple directional antennas
to provide steady, reliable wireless communication with
the microphones. It sends and receives the RF signal in a
cardioid pattern with the greatest sensitivity toward the face
of the device. Always aim this side toward the microphone
coverage area.
Cardioid RF Pattern
To Next Page
Loading...
