16
Hardware Description
⑨ Output Attenuation Control
Use the up/down buttons to attenuate the channel output
from 0 dB (no attenuation) to -24 dB in 1 dB increments,
and from -24 to -78 in 3 dB increments.
⑩ Level Meter
Displays a selected channel's audio level in dBFS. It is
good practice to use -18 dBFS on the output meter as an
approximation of 0 VU on an analog meter.
⑪ Hardware Status LEDs
Indicate the status of the hardware:
LED Color Status
Power Green Unit is powered on.
Ethernet Green Connected to an Ethernet device.
Network
Audio
Green
All connected receive channels are OK
(receiving digital audio as expected).
Flashing
Green
One or more connected receive channels
experiencing a subscription error or is
unresolved (transmitting device is off,
disconnected, renamed or has incorrect
network setting).
Off
No receive channels connected (routing has
not been established).
Lockout Red
Front panel gain and mute controls are
locked. The LED will blink when a button is
pressed while the hardware is locked.
⑫ Headphone Volume Knob
Adjusts the volume to the headphone output.
⑬ Headphone Output
1/4" (6.35 mm) output jack for monitoring audio going to
and from the digital audio network.
Note: Audio is present only when the unit is connected to a digital audio network.
To Next Page
Loading...
