Shure MXA910 - Page 78

Shure Incorporated
78/87
MXA910 Response:
< REP xx NA_CHAN_NAME {yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy} >
Where xx is channel number. Where
{yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy}
is 31 char channel name. Value is
padded with spaces as needed to
ensure that 31 char are always re
ported.
Get Control Network MAC Address
Command String:
< GET CONTROL_MAC_ADDR >
MXA910 Response:
< REP CONTROL_ MAC_ADDR yy:yy:yy:yy:yy:yy >
Where yy:yy:yy:yy:yy:yy is a 17 char
literal string formatted as 6 octets,
each separated by a colon. Exam
ple: 00:0E:DD:FF:F1:63
Get Device Mute LED State
Command String:
< GET DEV_MUTE_STATUS_LED_STATE >
MXA910 Response:
< REP DEV_MUTE_STATUS_LED_STATE ON >
< REP DEV_MUTE_STATUS_LED_STATE OFF >
ON = MUTED OFF = UNMUTED
Restore Default Settings (firmware > v2.0)
Command String:
< SET DEFAULT_SETTINGS >
Request the device to set itself to
default settings.
MXA910 Response:
< REP PRESET xx >
where xx = 00 if restore is success
ful
Get Active Mic Channels
Command String:
< GET NUM_ACTIVE_MICS >
MXA910 Response:
< REP NUM_ACTIVE_MICS x >
where x is number of active chan
nels that takes on values: MXA910:
channels 1-8