Operating Instructions Chapter 2
CLV62x Bar Code Scanner
Safety information
8011965/S345/2008-04-16 © SICK AG · Division Auto Ident · Germany · All rights reserved 13
2.3.2 Laser radiation of the bar code scanner
Fig. 2-1: Outlet opening of the laser radiation at the reading window (shown here: Ethernet
version)
Important Bar code scanners in series CLV62x operate with a laser of wavelength λ = 655 nm (red
light). The radiation emitted is not harmful to human skin.
The product is classified in laser class 2 (laser class II) in accordance with EN 60825-1,
IEC 60825-1 and 21 CFR 1040.10 (see the warning sign on the device for the date of pub-
lication)
Maintenance is not required to ensure compliance with laser class 2.
The bar code scanner displays a black and yellow laser warning sign.
Outlet opening
Damage to the eyes through laser radiation!
The bar code scanner operates with an red light laser of class 2. Looking at the laser's li-
ght path for a longer period of time can damage the eye's retina.
The entire reading window is the LED radiation outlet opening.
Caution - use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
¾ Never look directly into the light path (similar to sun light).
¾ Never direct the device's laser beam at the eyes of persons.
¾ When installing and aligning the bar code scanner, avoid laser beam reflections from
reflective surfaces.
¾ Do not open the housing. (Opening does not interrupt the activation of the laser diode
by the reading pulsing.)
¾ Always observe the latest valid version of laser protection regulations.
To Next Page
Loading...
Need help?
General
