SICK DUSTHUNTER SB30

24
8026957/AE00/V1-0/2021-08| SICKOPERATING INSTRUCTIONS | DUSTHUNTER SB30
Subject to change without notice
3 ASSEMBLY AND INSTALLATION
▸ Provide sufficient space to attach and remove the weather hood when installing the
purge air unit outdoors see “Purge air unit layout and assembly dimensions (dimensions
in mm)”, page 24).
3.2.4 Assembly work
▸ Prepare holder (see “Purge air unit layout and assembly dimensions (dimensions in
mm)”, page 24).
▸ Fasten purge air unit with 4 M8 screws.
▸ Check whether the filter element is fitted in the filter housing otherwise fit when
necessary.
Fig. 11: Purge air unit layout and assembly dimensions (dimensions in mm)

> 140
Clearance to fit weather hood

Flange with tube

Clearance to exchange filter element

Alternative: Mounting bracket

Steel pipe 50 x 5 DIN 2391

Duct
(550)

470
50
M 8
> 160
(550)

470

