SICK DUSTHUNTER SB30

70
8026957/AE00/V1-0/2021-08| SICKOPERATING INSTRUCTIONS | DUSTHUNTER SB30
Subject to change without notice
8 SPECIFICATIONS
8.4 Accessories
8.4.1 Connections for sender/receiver unit
8.4.2 Line, sender/receiver unit - MCU
8.4.3 Purge air supply
8.4.4 Assembly parts
8.4.5 Device check accessories
8.5 Consumable parts for 2-years operation
Designation
Part No.
7-pole socket for connection of power supply (plug connector 1)
6049886
7-pole plug for connection of AO and status signals (plug connector 2)
6049036
5-pole socket for connection of DI and Service (plug connector 3)
6009719
Designation
Part No.
Connection line, length 5 m
7042017
Connection line, length 10 m
7042018
Connection line, length 5 m, for ModBus® connection
2117481
Connection line, length 10 m, for ModBus® connection
2117482
Designation
Part No.
Non-return valve DN40
2035098
Purge air hose DN 40, sold by the meter
5304683
Hose clamp D32-52
5300809
Purge air heater with enclosure for fitting outdoors
230 V AC, 50/60 Hz, 3000 W, 1 ph
2021514
Purge air heater with enclosure for fitting outdoors
120 V AC, 50/60 Hz, 2200 W, 1 ph
2021513
Designation
Part No.
Assembly kit
2048677
Light trap DHSB
2110041
Flange with tube, length 130 mm, St37
2017845
Flange with tube, length 130 mm, 1.4571
2017846
Weld-on flange is required for the light trap
Designation
Part No.
USB-RS485 adapter
2040718
Check filter set
2042339
Optic carrier for linearity test DUSTHUNTER SB50
2048281
Adjusting stand
2042907
Designation
Number Part No.
Filter element Micro-Topelement C11 100
4 5306091
Optics cloth (for optional external purge air unit)
4 4003353
Button cell BR 2032
1 2085319