61
8026957/AE00/V1-0/2021-08| SICK OPERATING INSTRUCTIONS | DUSTHUNTER SB30
Subject to change without notice
SPECIFICATIONS 8
8Specifications
8.1 Compliances
The technical design of this device complies with the following EU directives and EN
standards:
● EU Directive: LVD (Low Voltage Directive)
● EU Directive: EMC (Electromagnetic Compatibility)
Applied EN standards:
● EN 61010-1, Safety requirements for electrical equipment for measurement, control
and laboratory use
● EN 61326, Electrical equipment for measurement technology, control technology and
laboratory use - EMC requirements
● EN 14181, Stationary source emissions - Quality assurance of automated measuring
systems
Electrical protection
● Insulation: Protection class 1 according to EN 61010-1
● Insulation coordination: Measuring category II according to EN 61010-1
● Contamination: The device operates safely in an environment up to degree of
contamination 2 according to EN 61010-1 (usual, not conductive contamination and
temporary conductivity by occasional moisture condensation).
● Electrical energy: The wiring system to the power supply voltage of the system must be
installed and fused according to the relevant regulations.
Approvals
The DUSTHUNTER SB30 version is TÜV type-tested.
To Next Page
Loading...