SICK DUSTHUNTER SB30

30
8026957/AE00/V1-0/2021-08| SICKOPERATING INSTRUCTIONS | DUSTHUNTER SB30
Subject to change without notice
3 ASSEMBLY AND INSTALLATION
3.3.5 Connecting the sender/receiver unit
3.3.5.1 Work to be done
▸ Connect the connection line.
3.3.5.2 Connection of connection line
Fig. 16: Plug connector connection to on-site line
NOTE:
▸ Only use shielded lines with twisted pairs (e.g. UNITRONIC LiYCY (TP)
4 x 2 x 0.25 mm² from LAPPKabel; not suitable for underground laying).
Cable provided by customer according to
page 27, §3.3.2
Closed
Closed
Open
Open
A
A
A -A

+24 V
Note
To open, connect the plug connector to the plug
on the sender/receiver unit.


RS485 B

RS485 A


gnd

Shield