50
8026957/AE00/V1-0/2021-08| SICKOPERATING INSTRUCTIONS | DUSTHUNTER SB30
Subject to change without notice
5 TRANSPORT AND STORAGE
5 Transport and storage
5.1 Transport
Observe the following points when transporting the device:
▸ Protect the openings of the device sender/receiver unit from weather and dust.
▸ Pack all components for transport so that shocks cannot damage the components.
▸ Close open electrical connections dust-tight.
▸ The environmental conditions in the Technical Data must also be observed when
transporting the measuring system (see “Technical data”, page 62).
5.2 Storage
Observe the following points when storing the device:
▸ Process media residues can be hazardous to health.
▸ Close open electrical connections dust-tight.
▸ Protect the device openings of the sender/receiver unit from weather and dust.
▸ Pack all components for storage.
▸ Store all measuring device components at room temperature in a ventilated, dry, clean
area.
▸ The environmental conditions in the Technical Data must also be observed when storing
the measuring system (see “Technical data”, page 62).
To Next Page
Loading...