SICK Inspector83x - Commissioning; Password Management; Computer Software

8 Commissioning
NOTE
Update the device firmware version before you start using the device. Always use the
latest version, unless there is a specific need to use an older version. Download the
latest version of the firmware from the SICK Support Portal (supportportal.sick.com)
and install it using SICK AppManager.
Inspector8xx is a programmable device. To use it, the following options are available:
•
Using the default SensorApp Nova 2D with a pre-activated Quality Inspection
license (see "Default SensorApp: Nova 2D", page 42).
•
Using other SensorApps that are available for the device (see "Installing Sensor‐
Apps", page 43).
•
Programming SensorApps for the device (see "Programming the device",
page 44).
8.1
Password management
Overview
The standard password for Userlevel: Service is Servicelevel. However, each pack‐
age can be built with a different password. If you are installing a beta release, ask the
provider for the userlevel and password.
NOTE
For security reasons, it is strongly recommended to change the default password.
UserLevel passwords can be managed using the Sick Windows program SOPAS Engi‐
neering Tool (SOPAS ET). To use this program, download one of the variants of SOPAS
ET and install it from www.sick.com.
Password change
To change the password of a UserLevel, add your device to a SOPAS ET project. The
process for finding devices is described in the SOPAS ET manual under the section
Searching Result Area. You can find the SOPAS ET manual in the folder help in the path
where you installed SOPAS ET. By default, this path is:
•
For installed version: C:\Program Files (x86)\SOPAS ET\help
•
For portable version: <path-to-download-location>\help
Changing the password
1. Click Login on the device to open up the login dialog, and log in as Service. If
you have not changed the default password, you will automatically be prompted to
change it.
2. Select the device and press the ⋮ symbol in the upper right corner.
3. Select Device/Change password... to initiate a password change.
Password recovery
Password recovery is described in the section Password Recovery of the SOPAS ET man‐
ual.
8.2 Computer software
SICK AppManager
The SICK AppManager software can be used for the following actions:
COMMISSIONING 8
8029044/1MYO/2024-04 | SICK O P E R A T I N G I N S T R U C T I O N S | Inspector83x
41
Subject to change without notice