SICK MITSUBISHI ELECTRIC MELSEC iQ-F Series - EC Declaration of Conformity

132
APPX
Appendix 2 Standards
*1 FX5-SF-MU4T5s and FX5-SF-8DI4s are open-type devices (devices designed to be housed inside other equipment) intended to be
placed in a conductive control panel. The tests were conducted with the device installed in a control panel.
EC declaration of conformity
EN61000-4-16
Immunity to conducted, common mode
disturbances
*1
Low-frequency noise is applied to power lines and
signal lines.
• AC power
1.5 k to 15 kHz: 1 to 10 V, 20 dB/Dec.
15 k to 150 kHz: 10 V
• DC power
1.5 k to 15 kHz: 1 to 10 V, 20 dB/Dec.
15 k to 150 kHz: 10 V
DC, 16 2/3 Hz, 50/60 Hz: 10 V continuous, 100 V
for a short time (1s)
150/180 Hz: 10 V continuous
• I/O signal/control
1.5 k to 15 kHz: 1 to 10 V, 20 dB/Dec.
15 k to 150 kHz: 10 V
DC, 16 2/3 Hz, 50/60 Hz: 10 V continuous, 100 V
for a short time (1s)
150/180 Hz: 10 V continuous
Test item Test description Value specified in standard
We,
Manufacturer : MITSUBISHI ELECTRIC CORPORATION
Address
(Place of Declare)
:
TOKYO 100-8310, JAPAN
Brand Name :
declare under our sole responsibility that the product
Description : Programmable Controller
Type of Model : MELSEC iQ-F Series FX5
Notice : Refer to next page about each type name
to which this declaration relates is in conformity with the following standard and directive.
Directive Harmonized Standard Notified Body
EMC Directive 2014/30/EU
EN61131-2
2007
-
Machinery Directive 2006/42/EU
EN ISO 13849-1
2015
1
RoHS Directive 2011/65/EU
EN50581 2012 EN62321 2009
-
This declaration is based on the conformit
y
assessment of followin
g
Notified Bod
y
No. Name and Address Identification
Number
Issued certificate No.
1T
Ü
V S
Ü
D Product Service GmbH
Ridlerstraße
65, 80339 Munich, Germany

0123 M6A 083244 0001
EU DECLARATION OF CONFORMITY
APPENDIX List of type name to declare
FX5-SF-8DI4 FX5-SF-MU4T5