SICK MITSUBISHI ELECTRIC MELSEC iQ-F Series - Troubleshooting

APPX
Appendix 6 How to Use MELSEC iQ-F Series Safety Extension Module Configuration Guide
165
A
Troubleshooting
The following shows the corrective actions when MELSEC iQ-F Series Safety Extension Module Configuration Guide does
not operate normally.
When the configuration guide does not start normally on Internet Explorer 11 (1)
Perform the following procedure when MELSEC iQ-F Series Safety Extension Module Configuration Guide does not start
normally on Internet Explorer 11.
1. Start Windows Explorer and open the folder where MELSEC iQ-F Series Safety Extension Module Configuration Guide
is stored.
2. Right-click 'START.html' and select [Properties] from the shortcut menu.
3. Open the [General] tab of the property screen.
4. Click the [Unblock] button in "Security".
*1
5. Click the [OK] button.
6. Execute 'START.html' again.
*2
*1 The "Security" section may not be displayed depending on the usage environment.
*2 When the message "Internet Explorer restricted this webpage from running scripts or ActiveX controls." is displayed in the lower side of
the screen at the Internet Explorer 11 startup, click the [Allow blocked content] button.