SICK MITSUBISHI ELECTRIC MELSEC iQ-F Series - Page 156

154
APPX
Appendix 6 How to Use MELSEC iQ-F Series Safety Extension Module Configuration Guide
Toolbar
The following shows the screen configuration of the toolbar.
Window
Displayed items
Configuration template files corresponding to each program are stored in the 'template' folder which is
included in MELSEC iQ-F Series Safety Extension Module Configuration Guide.
The template files can be opened from (Open) on the toolbar.
No. Item Description
(1) Open To open saved data.
(2) Save To save set data.
(3) Clear configuration To delete the open configuration.
(4) Configuration To check and print the set configuration.
For the detail screen, refer to the following:
Page 155 Configuration screen
(5) General input settings To set a restart interlock and an external device monitoring (EDM).
The following shows the display example:
(Example) When the program 1 is set for an FX5-SF-MU4T5
By clicking (Setting), the setting screen of a restart interlock and an external device
monitoring (EDM) are displayed.
(6) Logic To check logic of a selected program for each module.
(7) Wiring To check the wiring of the set data.
The wiring diagram can be printed.
For the detail screen, refer to the following:
Page 156 Wiring screen
(8) Language selection To switch the displayed language among Japanese, English, or Simplified Chinese.
(1) (2) (3) (4) (5) (6) (7) (8)