34
2 SPECIFICATIONS
2.6 Parts Names
FX5-SF-8DI4
No. Name Description
(1) INPUT A rotary switch To select a program. For details on the functions to select a program, refer to the following:
Page 40 Built-In Program Selection Function
(2) INPUT B rotary switch
(3) Terminal block (spring clamp terminal
block)
A spring clamp terminal block. For details on the signal array, refer to the following:
Page 92 Terminal Arrangement
(4) Direct mounting hole Screw holes (2-Φ4.5, mounting screw: M4 screw) for direct installation.
(5) Operations status display LEDs To indicate the operating status of the module. (Page 35 LED indication)
(6) Extension cable A cable for connecting a preceding module.
(7) Extension connector A connector for connecting the extension cable of an extension module.
(8) Name plate The product model name and manufacturer's serial number are shown.
(9) DIN rail mounting groove The module can be installed on DIN46277 rail (35 mm wide).
(10) DIN rail mounting hook A hook for mounting the module on a DIN rail of DIN46277 (35 mm wide).
(11) Pull out tab To use for drawing out an extension cable.
(1)
(2)
(3)
(4)
(5)
(5)
(6)
(7)
(11)
(9)
(10)
(8)
2-I4.5 mounting holes
To Next Page
Loading...
